Wyze cam v3 mount for bambu lid - Free 3D Print Model

Search models, users, collections, and posts

madizmo

3D Printer>3D Printer Accessories

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.8(43)

0.16mm layer, 2 walls, 5% infill

1.2 h

1 plate

4.6(8)

WyzeCam V4 - Full-frame - black liner - no scaling

6.7 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

155

495

497

352

Released

Description

Top glass camera mount for wyze cam V3, replaces stock handle. I used 10mm X 3.5mm rubber door bumbers on the bottom side to keep vibrations down, insert the spacer on the top side of the glass around the screws to prevent it from pulling the mount on an angle when tightened. Camera is a snug fit but I intended it to be so it doesn't rattle out, it will snap in nice and tight

top glass camera mount

Comment & Rating (62)

@kenneth.nesser

Print Profile

0.16mm layer, 2 walls, 15% infill

Scale up to 103% on a V4 perfectly snug

(Edited)

@aidens3dprints

thank you!

@pthalodezin

Boosted

it does work, but I have uploaded a more specific version for V4 that fits even better and doesn't crop the sides of the image

@Pinpinou

Print Profile

0.16mm layer, 2 walls, 15% infill

I scaled it to 103% for the Wyze 4 and it's perfect thank you

Show original

@3DMakerMax

Print Profile

0.16mm layer, 2 walls, 15% infill

Printed great, attached easily, fit snug. Used Sunlu Pla+ in black and Bambu Support filament for the interface. Thanks!

@pthalodezin

Boosted

Love this model. I printed it twice for my V3s on my P1Ss. I decided to upgrade to V4s and went with the scaling approach. it didn't do it for me, but it worked as the basis for my reworking of the design, specifically for V4s. The profile is uploaded if anyone else wants to use it. If you want single color, just make both objects the same color. Pretty sure the slicer will boolean join them for you.

@AryahsFuture

Print Profile

0.16mm layer, 2 walls, 5% infill

awesome update to the original, the FOV is so much better and it sits really well. great job!

(Edited)

@AryahsFuture

Print Profile

0.16mm layer, 2 walls, 15% infill

Mock setup because I'm not sold on this camera angle yet. I dont like how im able to see the sides of the camera holder in the frame, maybe you can flare them out in later design? still solid product 👌 update: secured it to top glass and put some bumpers on the bottom. seems pretty sturdy.

(Edited)

@Genepi

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

great deaign!

@Poly_Designs

Print Profile

0.16mm layer, 2 walls, 15% infill

Works great.

@phamworks

Boosted

works great. thanks for sharing

@hroller

Print Profile

0.16mm layer, 2 walls, 15% infill

Printed clean, worked great until I decided I needed a different top riser, but nothing wrong with the model

The profile uploader has replied

@madizmo

I just added a new riser too and the glass sits on more of an angle, i tweaked the model to work good with it, can upload it if your intersted

(Edited)

@user_4199950103

Replying to @madizmo :

yes please if you still have this!

@GoM3Zz

Replying to @madizmo :

do you have the angled glass profile?

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

V3 Series - Impossible Passthrough Cone - Mk 2

RJ Design

66.5 k

13.9 k

Wyze Cam v3 Door Mount for Bambu P1S

thelanlegend

746

180

Wyze Cam v3 Mount

Fort Wayne 3D Printing

Bambu A1 and A1 Mini Wyze Cam V3 base mount

JohnPepsi

1 k

282