Airsoft Suppressor Set M11CW & M14CCW
Print Profile(1)
Description
Description
I have designed an airsoft suppressor with various designs. Each version is available with 11mm CW and 14mm CCW threads. The 11mm CW version is ideally suited for the Mosquito Airsoft. Print the entire piece with a layer height between 0.1mm and 0.3mm, depending on the desired surface finish. I recommend 100% infill.
Changelog v2:
A 1mm chamfer has been added to the ejector, and the knurling has been slightly enlarged to improve printability.
The pictured printed parts are not my own; they were taken from an older post on another platform.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I have designed an airsoft suppressor featuring various designs. Each version includes both 11mm CW and 14mm CCW threads. The 11mm CW version is perfectly compatible with the Mosquito Airsoft. Print the entire piece using a layer height between 0.1mm and 0.3mm to achieve your desired surface finish. I recommend a 100% infill.
Changelog v2:
A 1mm chamfer has been added to the ejector, and the knurling has been slightly increased in size to improve printability.
The depicted printed parts are not my own; they were sourced from a previous post on a different platform.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)