SV08 Cable Chain Gantry Connector Flexible Joints

The original model didn't seem to have the connector to the gantry, so i fixed that

As well as the end links could not bend due to the square corners, so i made a rounded piece.

Instructions:

• Print out the short drag chain connector SV08 Shorter under the drag chain connector by Valerie Moore | Download free STL model | Printables.com
• print out the gantry connector
• Print out 17 original chain links, and 2 rounded chain links (total 19)

Print these in higher temp materials such as petg, abs, or asa.

you will need some M3 12mm or 16mm to replace the screws of the original holder if you plan on keeping it, otherwise just use zipties in the holes to hold your cable.