Church Christmas Calendar

Jule kalender med 24 låger.
Væggene i kirken har en murstens struktur og kræver at du printer de to første lag langsomt.

Jeg har brugt magneter i her enkelt skuffe. disse skal bare skubbes op fra bunden. Brug evt. en klat sekundlim.

De magneter jeg selv har brugt, er 10*1 mm. men der burde være plads til 10*1,5 mm.
når du printer selve nøglen skal du huske at pause den for at komme magneter inden i printet. Jeg har lavet god plads til forskellige typer magneter.

HUSK at vende dine magneter den samme vej.

Dette er min første model, så bær over med mig. Forslag og ideer modtages meget gerne.

GLÆDELIG JUL.

Christmas calendar with 24 doors.

The walls of the church have a brick structure and require you to print the first two layers slowly.

I have used magnets in this single drawer. These just need to be pushed up from the bottom. Use a dab of superglue if necessary.

The magnets I have used are 10*1 mm. but there should be room for 10*1.5 mm.

when you print the key itself, remember to pause it to get magnets inside the print. I have made plenty of room for different types of magnets.

REMEMBER to turn your magnets the same way.

This is my first model, so bear with me. Suggestions and ideas are very welcome.

MERRY CHRISTMAS.