Filament Funnel - Free 3D Print Model

Search models, users, collections, and posts

imicsavo

3D Printer>3D Printer Accessories

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

2.2 h

4 plates

4.8(188)

longer slimmer tip for compatibility with PTFE Tube Coupler

40 min

1 plate

5.0(3)

Open in Bambu Studio

Boost

355

1147

207

1.8 k

1.1 k

Released

Description

A little filament guide / funnel for Mdesign's side spool holder or for any other holes with M10 threads.

The original filament spool holder can be found here:

https://makerworld.com/en/models/236809#profileId-277146

Update 09/Feb-2025:

Added a cut-out picture with an example installation.

Added 3 more versions:

-Smaller thread versions for easier installation
-No tip versions for different type of couplers.

Comment & Rating (207)

@QuickieSilver

Print Profile

0.2mm layer, 2 walls, 15% infill

At first this seemed great but I ran in issues of filament binding up and causing extrusion issues when the spool got low. I ended up just drilling hole through printer PC4 connector to pass the ptfe tube straight through. No snags, no binding, also now gives some flex when the spool gets low. 4 stars for a good idea and clean print

@Tinkertumezie

I like this, keep it simple. Nice work.

@user_3876696335

Awesome idea and execution. For some reason my TPE tube and Filament would not fit in neither hole. So I took my handy dandy dremel and made room for both to fit. Thanks mate.

@user_462636711

what type of led you how for printer

@DMTaino

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed great, used ABS

@user_576366904

Boosted

And now, PETG orange from Sunlu.. perfect print. TNX for the model.

(Edited)

@user_1534230165

Print Profile

0.2mm layer, 2 walls, 15% infill

works. had slight drill hole biger. could have been my print. to tight for filiment.

@TOSHIRTCOM

Print Profile

0.2mm layer, 2 walls, 15% infill

great design

@DaTh

Print Profile

0.2mm layer, 2 walls, 15% infill

funktioniert super

@user_1604936332

Print Profile

0.2mm layer, 2 walls, 15% infill

Works well

(Edited)

Show original

@Matehias

Print Profile

0.2mm layer, 2 walls, 15% infill

Made the large thread without tube in petg, works perfectly

@Connor_96

Print Profile

0.2mm layer, 2 walls, 15% infill

printed with a 0.16mm layer height

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.