SnK3DD

cover

WhatsApp Image 2024-11-20 at 8.23.49 AM.jpeg

msg_picture_bd6b8620e5c46499c7960f07793d1b56.jpeg

plate_1.png

&nbsp;Slowed down a bit on outter wall and overhangs to improve quality on the lower section Use some supports easy to clean to help some areas.

1 Color Default Settings 0.2mm layer, 2 walls, 10% infill

Bauble

Deer Monochrome

plate_2.png

Tree Monochrome Without Stump

plate_3.png

Tree Stump

plate_4.png

Tree Monochrome With Stump

plate_5.png

Hanger

plate_6.png

Deer MultiColor

plate_7.png

Tree Multi Color

plate_8.png

Tree Multi Color Without Stump

plate_9.png

Sgt.Komander

IMG_0095_(1).jpeg

Color in parts

falken

IMG_0507.jpg

This model has 5 colors, this profile will allow you to print all 5 colors on a 4 color AMS/AMS Lite.Set filament number 2 and 4 both to your Black AMS position. &nbsp;The printer will automatically pause after it prints the eyes, which is the last time black is used. &nbsp;At that point unload the Black and load the color you want the antlers and top to be (yellow is what it is now). &nbsp;Your AMS will think it is still printing black, however it will now be printing your other color to finish the model.There are 306 color changes on this model, keep in mind the waste is the same no matter how many you print, so you may want to print multiples, as it does not add much time or material to do so.&nbsp;

FULL AMS COLOR w/ pause for 5 color print READ DESCRIPTION

MagnetDanny

photo_5913527070573577797_y.jpg

photo_5913527070573577794_y.jpg

photo_5913527070573577800_y.jpg

photo_5913527070573577799_y.jpg

I painted the support manually and took the chance to see if it's possible to print it with only 1 support branch (see in the picture next to the object) and it worked perfect, so sharing it with you so you can save some filament, Single Color, I used White Matte PLA , 0.2mm layer height, 2 walls, 10% infill, slowed down initial layer speed for better plate adhesion

1 support branch, 1 color, 0.2mm layer, 2 walls, 10% infill

Bulb

Tree

Deer

UP 3D

20251110_190641.jpg

Print by partsFixed supports for the bulb and deerFixed tree bases (one was in the air)Added brims

Print by parts (Fixed supports and tree bases)

brent

PXL_20251210_034605160.RAW-01.jpg

PXL_20251210_034712094.RAW-01.jpg

Had issues printing with the provided profiles. No supports on the front led to bad quality and all supports enabled had way too many supports. Tilting it back made it so no supports are needed for the front, and only needs print bed supports at the back (where defects will be hidden). This also uses a total of 7 materials (one is dedicated PLA support, optional)

Reoriented (Simpler Supports) - 7 Material - 0.16mm layer

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

An easy to print version of Christmas Bauble that can work either all white or Multi Color print.  Can also be printed in parts  (Uploading split option ASAP)

Christmas Bauble Reindeer

ASIA

Print Profile(6)

Description

Comment & Rating (500)

License

Related Models