PiNAS - The Raspberry Pi NAS

This case can be used to build a very compact Raspberry Pi powered two bay network attached storage (NAS).

If you like the design check out my page AraymBox for other projects. You can also post ideas on how to improve the design.

If you want to rebuild this NAS check out my instructable: https://www.instructables.com/id/PiNAS-the-Raspberry-Pi-NAS

You can leave a tip (button left) if you like my stuff.

Standard Parts:

• piNAS_Guts_HDD: Cage for normal 2.5" HDDs
• piNAS_Case_Front: Front part of the case
• piNAS_Case_Middle Middle part of the case
• piNAS_Case_Back: Back part of the case

Special Parts:

• piNAS_Guts_SSD: Cage for slim 2.5" SSDs
• piNAS_Case_Front_Inlay: Front part of the case for inlays like wood
• piNAS_Case_Front_stopper: Stopper for the inlay
• piNAS_Case_Front_Fan: Front part of the case if you want to add a 40mm fan
• piNAS_Case_Back_Pi4: Back part of the case for a RasPi 4

Updates:

• 04-FEB-2020: Released
• 05-FEB-2020: Added piNAS_Case_Front_Fan
• 05-FEB-2020: Added piNAS_Case_Back_Pi4