Thanksgiving Quaker Cat
Print Profile(2)
Description
Thanksgiving Quaker Cats!
Profile has both colored Quaker Cats and Black and White Quaker Cats. See below for color swaps for each.
AMS Ready - Color changes can be manually swapped.
Scale up or down on X/Y axis only. DO NOT adjust Z height!
If you get “floating regions” warning, that can safely be ignored and does not required supports.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x99mm in size
For Color:
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #17 (1.44mm) swap to Jade White for the rest.
For B&W:
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Jade White for the rest.
Any questions or requests, please ask!
Hueforge Easle by @3Dingo
Please leave a review!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (30)