HoldCtrl

cover

1000002077.png

1000002078.png

1000002079.png

1000002162.jpg

plate_1.png

Screenshot 2024-11-19 165620.png

Screenshot 2024-11-19 164719.png

1000002092.jpg

one color 0.2mm layer, 2 walls, 15% infill

plate_2.png

plate_3.png

plate_4.png

1000005664.jpg

Screenshot 2024-11-21 191353.png

pieces for non ams, simply glue pieces together

pieces for non ams 0.2mm layer, 2 walls, 15% infill

Bad Appleseed

Gnome Squad.jpg

Corrected for better support and easier detachment. Joined the 2 separate body pieces together for single color. Easy&nbsp;

3 Part Non-AMS, 1 Color Body, Nose, Beard

Ardent

Image_20241122152401.jpg

Image_20241122152356.jpg

To make it easy to hang on a Christmas tree, a hanging ring has been added.

With hanging ring 0.2mm layer, 2 walls, 15% infill

LucasJean

20241219_211013.jpg

Ich habe 4 verschiedene Farben für den Gnome und ihn auf 6,5cm geschrumpft.

I have used 4 different colors for the gnome and scaled him down to 6.5cm.

4 Color Model 6.5cm - 0.2mm layer, 2 walls, 15% infill

Weisnetde

IMG_5904.JPEG

clean and easy print with brim and little tree support,slowed down first layer for better adhesion,arachne + seam on the back

[Single Color] 0.2mm layer, 2 walls, 10% gyroid infill

Gnome (print by object)

MILK+3D

IMG_5706.jpeg

IMG_5704.jpeg

IMG_5703.jpeg

This print profile prints each color part by object on 1 plate including a hole to hang or to use as a keychain. If you would like to hang on your Christmas tree you can even use the prime line of filament to hang it

Print colors by object + hole to hang

giessener

WhatsApp Bild 2024-12-01 um 19.53.38_df546d55.jpg

Screenshot 2024-12-01 195619.jpg

I have an AMS but I wanted, to print it all at once. I reduced the size by 50%, the final model is about 7.5cm high. The other settings are the same as in the existing AMS profile

50% size (~7,5cm), one plate, print per object

eowynmn

IMG_1113.jpeg

IMG_1112.jpeg

I wanted to make tiny Gnomes to hide around my office just for fun. &nbsp;This Gnome was perfect. &nbsp;Simple but not too simple, and ams ready. &nbsp;I reduced model to 24 mm tall, then squished the Z height down to 20mm. &nbsp;Model is set up for two different color noses. &nbsp;I've printed 3 different sets now, and all are printing great. &nbsp; The model warns about overhang with slicing-but I've had zero issues on the A1 with this.&nbsp;

0.2mm layer, 2 walls, 15% infill

Emashi

20241203_084855.jpg

20241203_084838.jpg

20241203_094257.jpg

I connected beard with nose and Gnome body with hat to print it in 2 pieces, two colors, then glue together. I also added hole in hat to hang it on a tree

NO AMS, Two separate colors

plate_5.png

plate_6.png

RoxPrints

big gnome - 1.jpeg

big gnome - 1 (1).jpeg

gnome body - 1.jpeg

Publishing my 20,000% scaled-up print profile, as requested.

HUGE! Scaled to 20,000%. No AMS, multicolor, PLA.

Aloopex

Screenshot 2025-02-21 140550.png

Scaled to 15cm heightAdaptive layer height around nose and difficult parts of the hatElsewhere 0.2mmAdaptive cubic infill at 10% → Saves weight

Adaptive layer, 2 walls, 10% infill, adaptive cubic, 15cm

Salles

Img_2025_11_09_13_09_52.jpeg

using the 3 part profile scaled to 50%0.16mm High Quality profile with 15% gyroid infill

50% scale 0.16mm HQ, 2 walls, 15% gyroid

kopytko19

20251120_070116.jpg

20251120_065524.jpg

20251120_070212.jpg

Zrzut ekranu 2025-11-20 162827.png

Print Profile with added Fuzzy Skin on the Hat and beard. High 6,5cm

FUZZY SKIN PLA 0.2mm layer, 2 walls, 7% infill

gnomy.png

Gnome Army - no AMS, two separate colors wth hole

same as my other profile but prints 9 gnomes at onceusing the 3 part profile scaled to 50%0.16mm High Quality profile with 15% gyroid infill

9x 50% scale 0.16mm HQ, 2 walls, 15% gyroid

KLINDON

Immagine WhatsApp 2025-11-18 ore 16.45.01_a20f7082.jpg

Immagine WhatsApp 2025-11-18 ore 16.45.00_68938e46.jpg

Immagine WhatsApp 2025-11-18 ore 16.45.00_c8919c8e.jpg

Immagine WhatsApp 2025-11-18 ore 16.45.01_a20f7082_(1).jpg

0,16 layer per una migliore qualita di stampa e velocita un po abbassta2 loop15% infil

0.16mm layer height for better print quality and slightly reduced speed
2 walls
15% infill

0.16mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Your boosts help me make more designs! </boostcontent></boostme>Please consider giving this model a boost, it helps me continue to make free modelsEvery boost is appreciated thank you!!&nbsp;Print settings:15% infill or more0.20mmSupports onScale to preference&nbsp;If you are interested in selling physical prints of this model and others on our profile you can get the Comercial licenses on our patreon.Link in bio!! Thank you<a target="_blank" rel="noopener noreferrer ugc" href="https://www.patreon.com/c/Hold_Ctrl">https://www.patreon.com/c/Hold_Ctrl</a>&nbsp;<h3>Check out are new model on makerworld! 👇</h3><a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/2049675-aesthetic-santa-gnome-no-ams-needed">https://makerworld.com/en/models/2049675-aesthetic-santa-gnome-no-ams-needed</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000803885/design/2025-11-27_baa394c32a7c98.png"></figure>

Cute gnome 

ASIA

Print Profile(17)

Description

Check out are new model on makerworld! 👇

Comment & Rating (1587)

License

Related Models