Steampunk Edison Pipe Lamp E27

This lamp was inspired by stuff I saw on the Hannover Maker Faire. I designed it in four parts so it can easily be printed without supports. My print was in an iron-coloured PLA, the valve base in a copper colured PLA. For the main pipe and the flange, a fuzzy skin adds a bit of realism - adjust to your taste. After glueing everything together, I weathered it with a rust effect spray to give it the steam punk touch.

You will need an E27 lamp socket (link below), an M4 screw to attach the hand wheel and of course the hand wheel itself. I did not include one, there are so many different ones out there, here, on Thingiverse, on Printables and so on - just choose one you like. And yes, a nice Edison-style LED bulb would help to complete the project.

Cable, Switch and bulb socket: https://www.amazon.de/s?k=B08DQRJSKQ&__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=3KZDERWBLMTTA&sprefix=b08dqrjskq%2Caps%2C83&ref=nb_sb_noss