Clock Case For 195mm Round Clock Faces

This is the clock case only for my various 195mm clock faces found here. I used these clock movements. 

64 Sets Of Clock Hands - Click Here

There are are two number sets for arabic and roman numerals. Each number set can also be printed as .4mm inset into the face (requires AMS) or as 1mm high on the surface of the face (AMS not required. Use pause and change the filament). Change your color scheme by assigning colors for the case and the numbers on the object screen. Use 3x8mm or 3x10mm hex screws to attach the face plate and the optional desk stand.

If you prefer to load the stls yourself, they are all included in the download section. Load the case and your chosen number set onto the plate as an assembly and the numbers will be positioned correctly. A small amount of support is required on the underside of the mechanism mount. I just painted the minimum required. Supporting the entire surface will make it hard to remove.