Gift Ribbon - Style #2

Gift Ribbon - Style #2

These make great ornaments or tied to gifts as a beautiful bit of flare.

This print is sized at 89x100mm with 4 colors using Black, Red, Gold, and White. You can have a lot of fun with the coloring on these - if you are unsure of your color choices, just message me with the colors you plan to use and I can give you an example picture of what it may look like.

When slicing, if you get any warnings about floating regions you may safely ignore those! This uses the Arachne Wall method, which means more details but also longer slicing times - expect 3-5 minutes to slice!

You may scale this on the X/Y axis but NOT the Z axis - if you need a custom size, please let me know and I'll get a profile made for you.

The print profile is setup and ready for an AMS to make this an easy print. If you do not have an AMS, simply remove the color swaps in the slicer and replace with pauses so you can change colors.

Want to sell physical copies of my designs? Head to my Patreon page for a license

Want more Christmas theme prints? Check out some of my collections below

For those who wish to set the print up themselves and not use the setup profile, read below:
Be sure to use both the layer # AND layer height when putting in color changes. Since I use height modifiers in my profiles for faster prints, they may not line up - in that case, always use the layer height.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.48mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Overture Fresh Red Transmission Distance: 1.6
PLA PolyMaker Silk Gold Transmission Distance: 2.8
PLA Overture White Transmission Distance: 4.2

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Fresh Red
At layer #13 (1.12mm) swap to Silk Gold
At layer #21 (1.76mm) swap to White for the rest.