Mute Holders for Trumpet, Trombone, and Horns

Mute holder for your metal music stand.  Now will support for both Manhasset and Wenger model stands.

These fit perfect on my Manhasset #48 at home, and there is now a second print file for Wenger brand stands.  These holders clip onto the lip of the stand. I find it convenient for practices at school or wherever, as it clips on and off quickly and easily. I use it for straight and cup mutes.

Print Instructions:  

1. First determine your model of stand.  There are separate print profiles for Manhasset (with a flat lip) and Wenger (with a crimped lip) stands.  
   1. The Manhasset model fits very well on every Manhasset stand I've tried it on, but absolutely will not fit on a Wenger stand.
   2. The Wenger model fits very well on the Wenger stands, and fits pretty OK on Manhasset stands.  I prefer to have two sets, but it is possible to just use the Wenger model on both.
2. What mutes do you want to use?  There are three size holders:
   1. 60mm: Works great for smaller mutes such as Trumpet Straight and Cup Mutes.
   2. 84mm: Works great for larger mutes such as Trumpet Harmon, Wow Wow, or Bubble Mutes.
   3. 110mm: Works for larger Horn Mutes
3. Print the holder for your size and stand.  Then snap the insert ring into the holder!  Alternately for a softer touch and less noise, print the matching ring size from TPU and use that in place of the ring that prints with the holder.

UPDATE: I added two more sized holes, to fit your larger mutes.  The 60mm size is the standard which works for most Trumpet mutes.  84mm works fine for a harmon mute (due to the weighting of that mute you still need to be careful though).  110mm is set up for your larger instrument mutes - hopefully this should work for french horn and trombone mutes, but let me know!

UPDATE: I added two side hooks that can be put along side the mute holder and let you hang anything you want from them.

UPDATE: Updated the models to be pre-supported and print in two pieces.  This 1) dramatically improves print quality, and 2) allows for a new TPU insert to be used (optional) which makes the mute holder much less noisy when inserting the mute during a quiet passage.  The holders themselves are now slightly wider, but the inside geometry remains the same, so older accessory cups will still fit.  Additionally, the accessory cups have been updated to flush fit into the updated holders.