Wash & Cure 2.0 Hooking System

Hello,

Here is a simple creation allowing you to hang the lid of your Wash & Cure wherever you want.

I chose to hang it on the shelf above the machine but you can hang it on the wall, on the desk, etc.

You will need double-sided tape and 8 neodymium magnets 10x10x4mm, however if you have other magnets don't hesitate to contact me I can modify the model for you.

Easy printing and assembly: print without support, glue the 4 magnets of the P1 with super glue and slide the other 4 into the slots of the P2. Then use the double-sided tape to glue the P2 to your lid and the P1 wherever you want.

The use is simple: the centering is done naturally with the inner circles and to detach the lid, make a rotation of 1/8th of a turn approximately and the lid will be released.

Remember to subscribe to my account to be aware of my new objects!
If you find this useful and you like my work, you can thank me with a like, a comment or even a donation of any kind. This helps me to cover the design time and prototypes in order to offer you a maximum of friendly objects!

Thanks, Happy printing and above all have fun!!

Brixodin Performance 3D