Gangle Figurine DIY Kit TADC

Gangle Figurine DIY Kit

This project includes the parts required to make a Gangle figurine. Please note that the printed parts are not ready to be directly assembled into a finished product, but require manual modification. Additional tools required: sandpaper of about 100 grit, super glue (cyanoacrylate), pliers.

Print all parts in the designated color, or paint them after printing.

The black lines on the mouth are obtained by first filling the grooves on the mask with powder produced when sanding the black parts and then covering with super glue. Apply super glue evenly to the surface of the mask and tear drops, and let it dry to get a ceramic-like finish.

The shaping of the ribbon is achieved by soaking the parts in hot water and bending them while they are still hot. Use a thermos cup filled with hot water for convenient bending operation.

Gangle Figurine DIY Kit

This project includes the parts required to make a Gangle figurine. It should be noted that the printed parts are not ready to be directly assembled into a finished product, but require manual modification. Additional tools required: sandpaper of about 100 grit, super glue (cyanoacrylate), plier.

Print all parts in the right color, or paint them after printing (and shaping).

The black lines on the mouth are obtained by first filling the grooves on the mask with powder produced when sanding the black parts and then covering with super glue. Apply super glue evenly to the surface of the mask and tear drops, and let it dry to get a ceramic-like finish.

The shaping of the ribbon is achieved by soaking the parts in hot water and bending them while they are still hot. Use a thermos cup with hot water filled to the brim for convenient bending operation.