Print Profile(4)
Bill of Materials
- LED-Light-Kit-KC018 x 1:
Description
UPDATE: I added a new print profile that has added manual supports with adjusted support settings. This should help with the steep over hangs near the top of the globe. If you have any issues please reach out first before leaving feedback, as I might be able to help. TAKE YOUR TIME REMOVING SUPPORTS, TO PREVENT BREAKING THE INSIDE PARTS OF THE CLOBE. Thanks
This Christmas Ornament Globe Tea Light and Base uses a tea light that flickers to give the ambiance during the holiday season. The globe gives off enough light to illuminate the inside. Makes for a perfect gift.
FYI: Please use my print profiles for set slicer settings, as I can't guarantee 3rd party print profiles will print correctly. Third party profiles are collecting points for my hard work. Support my tested print profiles.
If there are any slicer warnings after slicing such as (floating regions, etc), you can ignore and the globe will print fine. You'll have to remove the small round supports on the bottom of the globe that holds the tea light. There might be a small amount of sanding on the outside circle opening, since there is some bridging and over hangs to print. Some fine grit sandpaper will get the job done.
If you enjoy this model consider giving a boost for supporting my work. Much appreciated.
Check out my other models:
Christmas Ornament with Tea Light https://makerworld.com/models/897383
Santa Tea light Globe and Base
https://makerworld.com/models/831999
Boost Me (for free)
If you like this model and want to support this creation, please give a rating, comment, or a boost. Thanks
Membership
To support my current and future model designs, consider purchasing a commercial license from the link in my profile.
Buy Me A Coffee
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (146)