Print Profile(1)
Description
My daughter is into The Rise of Red movie, in a big way. She wanted some Rebel at Heart earrings but I didn't find any. I created these from an image, and she loved them. Works well if you use French/shepherd hooks and a couple of rings to join the pieces. The hole is 1.2mm, which I found to fit some random silver jewelry rings we had previously purchased.
For slicing, I used the default profile for 0.4mm nozzle and 0.20 layer height. I only changed the bottom to have 5 layers and the top to have 3. The part is flipped, to print face down and get the texture from the build plate. The extra bottom layers result in a thicker front face (since it's printed face down), so you don't see the infill as much.
Everything else was left to defaults.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)