Print Profile(1)
Description
Mercat from Gabby's Dollhouse as a lightbox. A great Christmas present for your little ones ;o) I made this one for my four years old for christmas.
Print settings: 0.2 or better 0.16 mm layer height, no support (turn the front of the inlay onto the build plate/ I have already done this in the Bambu Sliver file).
In the 3mf file, the inlays are stored in both 0.2mm height and 0.4mm height. With a layer height of 0.2 mm, the LEDs are visible more quickly, but the blue is also more translucent. I printed my inlay at 0.4 mm height and am very happy with it. But it's a matter of taste, which is why I have stored both files.
Use a bit of glue on the inner site of the cover to fix the Inlay to the Cover.
Otherwise, I'm happy about likes and uploaded makes, but more about your children who are happy about this lamp.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (25)