IKEA Capita leg adapter for Phanteks 400A PC case
Print Profile(1)
Description
An adapter that allows you to mount IKEA Capita legs on your Phanteks P400A case. I think that the original feet on the case are too low, which is why I made these.
Required hardware:
4x M10x25mm bolts. (DIN 933 or 931)
Instructions:
Print the four adapters with the flat side on the print bed (with support enabled!).
Remove support and press bolts into place.
Unscrew the feet from your case and screw the adapters into place using the case's screws.
Screw the Capita legs onto the bolts until you feel that they are firmly in place.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)