Search models, users, collections, and posts
COWBOY BEBOP (Original Motion Picture Soundtrack)
IP Report
Print Profile(2)
0.08mm layer, 1 walls, 100% infill
Designer
4.8 h
1 plate
A1 mini 170x170 0.08mm layer, 1 walls, 100% infill
3.8 h
1 plate
Open in Bambu Studio
Boost
11
26
5
4
29
19
Released
Description
Project: bebop final.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.6mm
The Max Depth is 2.4mm and the Actual Depth is 2.4mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.1
PLA BambuLab Basic Red Transmission Distance: 4.2
PLA BambuLab Matte Ivory White Transmission Distance: 3.4
This print uses 3 unique filaments
Swap Instructions:
Start with Charcoal
At layerheight 1.08mm swap to Red
At layerheight 1.72mm swap to Ivory White for the rest.
3mf file has heightrange modifier to cut print time, as I went for some thickness withinin the baselayers.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (5)