Cable Organizer - One-Sided Winding

Trophy Builder - Design & Print your Own Medal or Cup🏆 More Info Here 👇

Have you ever needed to wind only one-side of a cable and the other side had to remain fixed? Are you bothered by unnecessarily long cables under your desk? The solution is here! Cable organizer with a groove that allows attachment to a desk with a clamp, or anywhere else with a wall mount. 😍

❗Update 19.11. Bug in Large Orgaizer profile has been fixed!❗

• It works on the same principle as the previous version.
• You can choose from two attachment methods: Clamp or Wall mount
• For wall mount attachment, 2x three diameter screws (twist) or double-sided adhesive tape can be used.
• The maximum cable diameter for the smaller version is 4.5 mm and the maximum length is 2 m (the length depends on the cable diameter).
• The maximum cable diameter for the larger version is 6 mm and the maximum length is 4 m (length depends on cable diameter).
• ❗Always wind the required length first and then plug the cable into the device❗ The cable rotates on the fixed side and there is a risk of damage to the cable.

👉Assembly instruction (Same as a previous version)

1. Insert the cable through the spool and adjust the required fixed length.

   

2. Insert the spool into the case and wind up the cable.

   

3. Place the cable organizer into the groove.