Search models, users, collections, and posts
Mounting bracket for RB4011 router in 10" rack
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
41 min
1 plate
Open in Bambu Studio
Boost
8
24
1
0
48
19
Released
Description
Rack mounting bracket that allows you to put a Mikrotik RB4011 in a 10" soho type server rack.
Caveats
The RB4011 is slightly wider than the space between the rails, which means a small portion of the routers face will be behind the rail, this does not inhibit normal use, all ports are accessible.
Careful
This is a quite a squeeze, use at your own risk. Be careful not to scratch your device on the rails etc., there is a good chance you will make some aesthetic damage to your fancy new gadget.
Print with a fairly high infill, at least 40% and 3+ walls, no support needed, print face down.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (1)