Nerf蛟龙发射器 super-easy shortened modification, no need to dismantle
Print Profile(1)
Description
1. First, remove the packing materials. You only need to remove it to the state shown in the image below, no need to remove it completely.
2. Insert the printed parts into the barrel from the muzzle, with the larger end facing inwards. Align with the groove and press in.
3. You will need a metal tube with an inner diameter of 13 and an outer diameter of 16, as shown below:
4. Once the inner tube is installed, you can load the ammo and play with it. Place the short ammo, push it back into the barrel, and the ammo will be pushed into the barrel.
Note: There is no stop limit to prevent the barrel from moving outward. If you find it difficult to load the ammo, you can disassemble the gun, remove the stop limit, and expand the distance of the ammo ejection.
Remember to get a stylish bearing tube!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)