Orange Pi Zero 2 Case
Print Profile(1)
Description
Orange Pi Zero 2 case w/short antenna
Listed below are the parts I got for what you see in my pics.
Extra Parts
Short antenna - https://amzn.to/3ADNXjv
Short U.FL cable - https://amzn.to/3V7J0sX
screws are M3 6mm (x8) or 6 if you only use 2 to hold the board in
Printing
You can use whatever you like, but I used PETG just in case it gets warm. I used 15% infill, but that's subjectable to what infill pattern you use, and what you feel like using.
Assembly
install the threaded U.FL cable in the case, then install the board. You can do it in any order, but this way you won't damage the board if you struggle with the cable. Then install the lid, and the antenna.
Category: Electronics
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)