Son Goku Dragonball LED Lamp

Son Goku Lamp – Stylish & Easy to Print Yourself

Here you will find a stylish lamp that you can easily print yourself – perfect for an atmospheric ambiance at home
Two variants are available to you:

🧷 Variant 1: Glued

🔩 Variant 2: Screwed

______________________________________

🛠️ Recommended Print Settings:

🔲 Main Part

• Optimal Layer Height: 0.16 mm for fine details
• Time-saving Alternative: up to max 0.20 mm

🪵 Back Panel with Diffuser

• Recommended: 0.20 mm
• Maximum: 0.24 mm
• This provides a particularly soft, pleasant light – ideal for a cozy atmosphere

💡 Note on the Back Panel:

• The back panel fits a bit looser intentionally, as I glue it before shipping
  If you prefer a tighter fit, you can enlarge the back panel in the slicer by 0.5% to 1% – simply try what works best for you

🔧 Details for the Glued Version

• LED Holder: This should be secured with some plastic glue
• LED Strips: Simply insert them – they usually hold well due to the adhesive surface on the back
  The printed support prevents the strips from detaching when heated (e.g. by COB LEDs)

• Recommended LED Strip Length: at least 74 cm

🔩 Details for the Screwed Version 🔩🪛

• Required Accessories:
  • 5x M3x6 Heat-set Threaded Inserts
  • 5x M3x12 Screws
• 🔧 Tip: Please do not overtighten the screws to avoid damage

I wish you much joy with printing and crafting! If you have questions or want to share your result, I look forward to your feedback! 
Happy Printing!