Space Telescope - Free 3D Print Model

Search models, users, collections, and posts

FlmanCreates

Education>Physics & Astronomy

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 2 walls, 15% infill,0.4mm

Designer

1.1 h

1 plate

4.4(12)

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

Designer

27 min

1 plate

5.0(2)

Open in Bambu Studio

Boost

158

289

154

Released

Description

Space Telescope to reach for the stars 🔭✨

*Updated profile for better speed and infill settings

Change in ambient temp caused some of the layers on the middle connection to not adhere the best, was the very first thing I printed with my new A1 mini and just used super glue to fix the legs.

Comment & Rating (39)

@Ideate.3D

Print Profile

0.12mm layer, 2 walls, 15% infill,0.4mm

I printed it to match my Redcat 51, and glued it to point up more like a scope. If the connector was oriented the other way, it could be positioned however! Either way, it printed well, and was exactly what I was hoping I'd find! Thanks!

The profile uploader has replied

@FlmanCreates

Looks really awesome with the colors chosen and the tent tea light, very well done and thank you for the review, I have it on the list to do a re-model as I had lost my original file from my laptop, reviews like this and seeing products come to life give me the push to try and innovate🙏

@Ideate.3D

Replying to @FlmanCreates :

It's a super fun and satisfying hobby for sure! I have no doubt that you'll remodel it even better than the first! ..and if I see it, I'll reprint!! Thanks again!

(Edited)

@user_1339526562

Print Profile

0.12mm layer, 2 walls, 15% infill,0.4mm

Support Issue:Continuously failed, it turns to spaghetti.

The profile uploader has replied

@FlmanCreates

Hello! I thank you for downloading , how may times did you attempt to print? As this is the first instance of this happening, have you happened to calibrate your printer and clean your print bed? This is usually the main culprit and hope this helps if you decide to re-print

@FlmanCreates

Judging by the amount of stringing I might also suggest drying your filament as this will cause layer adhesion issues and adhesion issues with the print bed itself

@user_1339526562

Replying to @FlmanCreates :

Hello, I printed it twice, once with the standard and the second time with supports auto generated. It did not work both times.

@patesz75

Print Profile

0.12mm layer, 2 walls, 15% infill,0.4mm

cool

The profile uploader has replied

@FlmanCreates

I appreciate sharing the photo, thank you for the download 🙌

@Rosie102823

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill,0.4mm

Printed with no problems but might try without brims on the legs if possible just for the texture aspect

The profile uploader has replied

@FlmanCreates

will do and thank you for the 5 star and feedback, looks great in what looks like some silk pla

@user_1090979920

Print Profile

0.12mm layer, 2 walls, 15% infill,0.4mm

looked good, we turned it into a christmas ornament

@user_482533878

do you think that you could post this? That would be cool as an ornament.

(Edited)

@user_1090979920

Replying to @user_482533878 :

here ya go!

@user_482533878

Replying to @user_1090979920 :

Thanks!

@Daraun

Print Profile

0.12mm layer, 2 walls, 15% infill,0.4mm

oh yes - for a friend of mine whos a newby astro. it was perfect ! needed some glue and it was good to go !

The profile uploader has replied

@FlmanCreates

Thank you for sharing! I had plans on going back to this design but lost my original fusion file :( Hoping to make a newer edition in the future!

@Capybara_

Print Profile

0.12mm layer, 2 walls, 15% infill,0.4mm

printed well looks good. I cant give 5 because bambu says the print failed even tho it didnt??

The profile uploader has replied

@FlmanCreates

Thank you , Could always be an issue with the app if you had to cancel for any reason, this often falls on the most recent print and will not allow you to rate higher unless you delete the revieew or re-print :)

@casah_

Print Profile

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

Super impression, my girlfriend is thrilled with this little decoration, just as the user who printed it in red and black said (I followed suit with the colors) It should be tilted as most telescopes have an equatorial mount

The profile uploader has replied

Show original

@FlmanCreates

Thank you for the download & review! I lost the original file to make some adjustments as some others has commented but would like to make another model in the future! Glad it works well :)

@Plugr12

Print Profile

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

ez print

The profile uploader has replied

@FlmanCreates

Thank you very much for the review! and am working on updating the model so the pieces will snap together, file got lost as it was an older upload

(Edited)

@Rosie102823

Boosted

great design

The designer has replied

@FlmanCreates

thank you very much, hope to see any printed examples

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

GIF

MINI SABER collaspible/telescoping sword

Joe Wilson

10.6 k

1.8 k

Hubble Space Telescope

WEIWAY

924

642

Hubble Space Telescope

Poleteswims

646

392

Standoff / Spacers for IKEA Skadis

AU3D

9 k

1.8 k