Diamond Painting Ship L / Tray for Garage Size L

Diamond Painting Ship L ... already with an insert for magnets... when the magnet garages come later

Please read

here is the matching ship for the 30s or other of my garages - L garages will follow

Ship size 12*7 cm

The ships consist of several print files, so that the bottom, decks, and hull can be printed in different colors

Insert and connect the bottom, decks, and hull simultaneously

here you can see how the ship is assembled:
https://mega.nz/file/gZwTTaBY#t284mr3rXQYCTORC0ctU4w59o3VYU6jV4FKe4cA5vpM

Plugs with tapering 0.2; 0.3; 0.4 ...included
I print 99% of the plugs with 0.4, but there is filament where the plug might be too tight or loose and you need a different one

Update: a parking deck was built into the update, where excess stones can be placed. As with the other ship, place all three parts into the slicer simultaneously and press yes

Plugs and lids are separate in STL Download

3D Print Settings

Insert and connect the bottom, decks, and hull simultaneously
Colors can be selected separately in Bambu Slicer

Best result with layer height 0.16
Outer wall speed 60 - 200mm/s
Inner wall and infill max. 150 - 270mm/s

Infill 10-15%