Cathedral Lincoln Lincolnshire 200x133

Beautiful picture taken of the Cathedral in Lincoln, Lincolnshire UK. Was taken by one of our Nerdherderz.

If adjusting the size… DO NOT change the Z height.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x133.33mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to Brown
At layer #15 (1.28mm) swap to Yellow
At layer #20 (1.68mm) swap to Jade White for the rest.