Bong 24,7cm Remixed by Langa__

Remixed by

Langa__

Household>Other House Models

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 5 walls, 30% infill

Designer

6.3 h

1 plate

4.9(7)

Open in Bambu Studio

Boost

Released

Description

24,7cm Bong

5 Walls

5 lower 5 upper Layer

30% infill

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

If you print with color transitions, please zoom in closely in the slicer and look at the transition!!!
it should not look like the one marked in red below!!!then the bong is leaking!!!

Comment & Rating (23)

@Brady121294

Print Profile

0.2mm layer, 5 walls, 30% infill

looks great, sadly mine wasn't air tight but oh well

The designer has replied

@Langa__

printed directly from the app and leaking?

@Brady121294

Replying to @Langa__ :

Yes, may have been my filament.. Didn't want to knock a star off for that!

(Edited)

@Langa__

Replying to @Brady121294 :

mmh...weird...I've printed it about 30 times and so far no problems...can you upload a photo of exactly where it's leaking?

@hellraicer1523

Print Profile

0.2mm layer, 5 walls, 30% infill

works very well. thanks. i used petg.

The designer has replied

@Langa__

i use it too✌🏼SmokeOn 🤜🏼🤛🏼

@Langa__

in my Uploads is the Ashcatcher for the Bong ☝🏼must try it! 👌🏼

@hellraicer1523

i printed the dynavap 14mm adapter for the bong but i try it

@user_2763799098

Print Profile

0.2mm layer, 5 walls, 30% infill

good print although I recommend anyone who prints this to do it on standard printing speed or slower for pristine results and to avoid possible leaking from layer failure during printing, it’s a long print but well worth it. :)

The designer has replied

@Langa__

thanks....SmOkE oN🤘

(Edited)