Feet and riser for longer ray5 20w laser engraver

Alternative to official longer3d stands for the Ray5 20w laser engraver. Certainly compatible with other Ray5 models.
With the base, you can fix the laser so that it's always in the same place, which is handy when you've made a grid.
I've modeled several 60 mm and 30 mm risers.
You'll need 4 mm threaded rod (4 pieces of 12 mm with 6 mm protruding from the base).
4 x 4 mm nuts
And as many 5mm-diameter hex-head screws and 5mm nuts as you need for the extensions.
Printed in PLA 0.2, 3 walls, 15% gyroid filling
The 4mm thread and hex head recesses are deliberately tight to avoid the need for glue.
You'll need to force the thread a little and pre-form it with a 4mm screw.

------------------------------------------------------------

Alternative to official longer3d stands for the Ray5 20w laser engraver. Certainly compatible with other Ray5 models.
With the base, you can fix the laser so that it's always in the same place, which is handy when you've made a grid.
I've modeled several 60 mm and 30 mm risers.
You'll need 4 mm threaded rod (4 pieces of 12 mm with 6 mm protruding from the base).
4 x 4 mm nuts
And as many 5mm-diameter hex-head screws and 5mm nuts as you need for the extensions.
Printed in PLA 0.2, 3 walls, 15% gyroid filling
The 4mm thread and hex head recesses are deliberately tight to avoid the need for glue.
You'll need to force the thread a little and pre-form it with a 4mm screw.