Lamp Shade, IKEA Arstid - Free 3D Print Model

Search models, users, collections, and posts

AntCop

Household>Decor

IP Report

Print Profile(1)

All

P1S

P1P

H2D

X1E

X1 Carbon

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

6 h

3 plates

5.0(13)

Open in Bambu Studio

Boost

123

331

212

Released

Description

This is a lampshade I made for the Ikea ÅRSTID floor lamp so it would match my table lamp with a similar shade.

The dimensions are posted in the pictures above. If you need any changes leave a comment and I will upload a new model.

I would play around with the infill pattern for the top and bottom ring to reduce the shading of the light coming through. I haven't had time to do that, the parts in the picture used the standard grid infill.

My Ikea lamp uses this nut from another creator:

E27 Fixture nut M40x2,5

morten.husum

https://makerworld.com/en/models/550268#profileId-468627

Comment & Rating (23)

@AmariZane

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Printed beautifully!

The profile uploader has replied

@AntCop

That looks fantastic! What material did you use?

@AmariZane

Boosted

Replying to @AntCop :

inland Cool White PLA for the edges and Inland Luminous Blue for the main portion. So it does glow in the dark a little when you turn the light off too!

(Edited)

@TanMakes

I used it on an octopus-shaped table lamp. It looks great. Thanks for sharing!

The designer has replied

@AntCop

The brown accents look great!

(Edited)

@Txemauto

Print Profile

0.16mm layer, 2 walls, 15% infill

First print perfect, let's go for the second and third... Thank you very much for your contribution to the community ✌️

(Edited)

Show original

@antonchikas

Nice lamp It fits the IKEA STRÅLA lamp base well, but you need an adapter from E27 to E14

(Edited)

Show original

@Darsan

Boosted

Perfectly fit to IKEA Ängland lamp also. I printed with ASA and glued together with cyanoacrylate (superglue). Very good model. Thank you!

@Puding420

Print Profile

0.16mm layer, 2 walls, 15% infill

@Printacademy67

You specified PLA Did this not turn into why

The designer has replied

Show original

@AntCop

It has been okay, I have dropped it a few times with no breaks. Nothing touches the lamp shade so there is no risk of it breaking. But yes, a thin wall made of PLA is very likely to split along the layer line when stressed.

@user_2176774374

Boosted

Hey. Nice Print, Is it possible to make it suitable for A1🙏🏻

The designer has replied

@AntCop

I think this fits on the A1 since it is the same print volume as the P1S? Otherwise I would try to scale it, it will get smaller but I cant really modify the shade into 2 parts and print it on a smaller volume.