20 Christmas Ornament - Hollow - 80mm

This is a huge, hollow, d20 with a small spot at the top for attaching something to hang it in your Christmas tree or anything else you wish. It has a 40mm triangle opening where you can fill it with dice, candy, or other small items.

This was a huge pain to print. It took about 7 tries. This is how I printed in place. I use Lychee, it should be similar in other slicers. I rotated it on plate, so one number (I used 6) was flat on the plate, and the opening was at the top of the print, because I had problems with it being open on the sites. I added a thick brim and printed it in place.

I used default settings in my slicer for my printer (Anycubic Kobra 2 Neo) and default settings for the filament I used. I printed 4 with the above method successfully, in a row. I used a 10mm jump ring to hang it. This is easily resized. I scaled it to test print

What didn't work: Supports, printing with the hollow part on the plate, using islands with rafts, supports with the print lifted and an angle facing down, supports with the print lifted and the d20 parallel to the plate.