USB C PD Decoy/Trigger Board Case - Free 3D Print Model

Search models, users, collections, and posts

DynaMight

Hobby & DIY>Electronics

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

H2D

A1 mini

H2D Pro

H2S

P2S

H2C

X2D

A2L

No text version - 0.2mm layer, 2 walls, 15% infill

Designer

15 min

1 plate

5.0(7)

12v version - 0.2mm layer, 2 walls, 15% infill

Designer

20 min

1 plate

5.0(3)

20V, PLA, 0.12 mm layer, 2 walls, 15% infill

27 min

1 plate

5.0(1)

Open in Bambu Studio

Boost

131

185

128

Released

Description

Heres a basic case I made for a cheap USBC PD Decoy Board, very cheap on Aliexpress. I'll add a pic of the one I used and also post a Aliexpress link. It supports 9, 12, 15 and 20v, although not super easy to change between as you have to move a very small resistor. They all seem to be preconfigured to 12v.

I tried to keep it as slim as possible but make the case so it can snap together and stay together. Theres also some strain relief for the cable, it wont stand up to a big tug tho! you could always hotglue as well.

I designed it around a cable I intended to use which had a diameter of 3.3mm, if your cable to thinner then the strain relief wont work too well, if your cable is thicker then you may need to file down a little!

I also added some text for the different voltages, these are saved as 3mf files but ofcourse theres a blank one. The Base is the same for all.

https://www.aliexpress.com/item/1005006191468955.html

Comment & Rating (21)

@yan_thu

Print Profile

12v version - 0.2mm layer, 2 walls, 15% infill

Perfect for my needs, small and easy design, thanks for the model!

@hytrolyciy

Boosted

Thanks! Good design!

@Gerber

Print Profile

No text version - 0.2mm layer, 2 walls, 15% infill

@Gerber

Print Profile

20V, PLA, 0.12 mm layer, 2 walls, 15% infill

@Gerber

Print Profile

12v version - 0.2mm layer, 2 walls, 15% infill

@Judahs

I have a question u seem to know the answer I want to make a light for my motorcycle helmet as nd I will be using a 6v battery pack I would like to charge with USBc what board do I buy thanks in advance

The designer has replied

@DynaMight

These PD Decoy boards are only really telling a PD USBC charger what voltage to output to, they are not chargers as such. If you want to charge a 6v battery, you'll need to find out what type of battery it is and find a charger board designed for it. It probably wont need a PD Decoy board, a charger board designed to charge a 6v battery will probably be fine running for 'normal' USB.