minimalist Vodafone Router wall mount - Free 3D Print Model

Search models, users, collections, and posts

ThePatoLab

Tools>Gadgets

IP Report

Print Profile(2)

All

A1 mini

CGA6444VF - 0.2mm layer, 2 walls, 15% infill

Designer

2.9 h

2 plates

4.5(11)

TG6442VF - 0.2mm layer, 2 walls, 15% infill

Designer

2.8 h

2 plates

5.0(1)

Open in Bambu Studio

Boost

101

167

105

Released

Description

This sleek, discreet wall mount is designed specifically for the Vodafone router, allowing you to securely mount your device on the wall with ease.

Attention please!!! This print is only for the models with the number CGA6444VF & TG6442CF

There are 2 different profiles with the right name. (Thanks to R3Tex for testing the TG model 👍)

If you have a different model, please contact me and add your models.

Made for stability and subtlety, this holder ensures your router stays safe and out of the way, preventing accidental falls and freeing up valuable surface space. The mount attaches to the wall with just two screws, making installation quick and easy while providing a stable hold. Ideal for keeping your setup organized and clutter-free, this minimalist mount blends seamlessly with any decor, letting your router perform at its best without drawing attention.

Boost Me (for free)

Boost me please (it's for free) ;-)

Comment & Rating (27)

@user_2274521383

Print Profile

CGA6444VF - 0.2mm layer, 2 walls, 15% infill

awesome thanks for sharing

The profile uploader has replied

@ThePatoLab

Gladly, thanks for the review 😊

Show original

@3DPrintTyrone

Print Profile

CGA6444VF - 0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@ThePatoLab

Thank you so much for the 5 stars and the fantastic photo—I am absolutely thrilled with your feedback

Show original

@Aubi02

Print Profile

CGA6444VF - 0.2mm layer, 2 walls, 15% infill

Minimally oversized for the Vodafone router

The profile uploader has replied

Show original

@ThePatoLab

Did you need to scale it? If so, by how much?

Show original

@Aubi02

Replying to @ThePatoLab :

I believe the end is too thick and the thread breaks too easily

Show original

@ThePatoLab

Replying to @Aubi02 :

Okay, thank you I will adjust it again

Show original

@alexbrazhnik

Print Profile

CGA6444VF - 0.2mm layer, 2 walls, 15% infill

Had to redo it myself a little bit, as it didn't go all the way in my router's foot, and took a bit to get the screw working — but still many thanks!

The profile uploader has replied

@ThePatoLab

Thank you so much for the review What exactly did you have to change

Show original

@alexbrazhnik

The diameter of the insert was too thick at first, my router foot has ~13mm inner diameter, so I replaced that leg with a 12.8mm cylinder. With a bit of sanding it was a tight press fit, which worked well

@MICELIOCREATIVO

Print Profile

CGA6444VF - 0.2mm layer, 2 walls, 15% infill

It works, it still doesn't fit me perfectly, but I managed to make it work

The profile uploader has replied

Show original

@ThePatoLab

Thank you for the review. Yes, I have already noticed that there seem to be multiple versions of the router. Apparently, they have different tolerances or dimensions. Unfortunately, I only have the one

Show original

@mzus

Print Profile

CGA6444VF - 0.2mm layer, 2 walls, 15% infill

Simple and effective

The profile uploader has replied

@ThePatoLab

Thank you for your review ☺️

Show original

@user_1067137049

Print Profile

CGA6444VF - 0.2mm layer, 2 walls, 15% infill

gread Design works well for my Router! but the printed screw was not smooth after removal of Support. finally the screw head detached when i tried to Drive the screw in with a little force. all in all great model

The profile uploader has replied

@ThePatoLab

Thanks for the review. Maybe the screw needs to be printed separately. Or possibly at a slower speed. I tried breaking it off again without the router, but I couldn't. I'll run some more tests and upload a new version. I also noticed that the router leans slightly away from the wall.

@ajelicious

Print Profile

CGA6444VF - 0.2mm layer, 2 walls, 15% infill

I printed the print plate for the left side, but it was on the right when viewed from the front The mounting for the installed foot was also a bit too large Perhaps I have a different model of the Vodafone Station

Show original