HueForge Quevedo, singer
Print Profile(1)
Description
Instagram: CanariasPrinter3D
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x162.93mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Basic Red Transmission Distance: 5
PLA Gold Transmission Distance: 2
PLA Basic White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #14 (1.2mm) swap to Metallic Gold
At layer #17 (1.44mm) swap to Jade White for the rest.
Boost Me (for free)
Thank you for your support!
🔧 Printing Tips
Before printing, please clean your printer's bed for better results. I recommend using a 3D printing stick or spray for firm and secure adhesion. This will prevent adhesion problems and ensure a better finish from the first layer.
📸 Share Your Result
Each printer and every setting can greatly change the final finish. How did your figure turn out? I would love to see it. Upload it and share your photos with the community so we can all continue to grow!
ENJOY!!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)