Walther PPQ M2 IPSC Skin Mod

1. This model is a skin mod only, replacing the main exterior parts of the original model. It requires the original model file to complete.

2. It needs to be split and arranged in the slicing software before printing.

3. The following accessories need to be replaced or added based on the original model's hardware kit:

Replacement: 3.0 diameter cylindrical pin, 32mm long * 1
Replacement: M5 outer diameter 6, 35mm long lock nut * 1 set
Replacement: m3 countersunk screws, 16mm long * 4
Added: m1 machine sight fiber optic, 7mm * 1, 47mm * 2

——————————————————————————————————————————

20241115 Update

1. Added a quick-release cover decorative file below the grip. The file includes replacement files for the original quick-release model and the quick-release cover model.

2. Added a bell mouth file below the grip. When installing, use the 4 m3*12mm screws that share the 4 screw holes under the grip, or replace with 4 m3*14mm screws.

3. Added hardware: m3 countersunk screw, 16mm long * 1. (Optional: m3*14mm * 4)