Yet Another Fujifilm X100v Thumbgrip - Free 3D Print Model

Search models, users, collections, and posts

Björn Heirman

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 3 walls, 100% infill

Designer

17 min

1 plate

4.4(32)

Open in Bambu Studio

Boost

104

361

650

531

Released

Description

I tried many of the thumbgrips I found online, but I didn't like any of them so I made my own. I took the best of all designs I tried and combined it into one design to rule them all.

You might need to sand the part that slides in the hotshoe down a little for a smooth fit in the camera. It is obviously best if it has a tight fit so it doesn't slide out.

I guess it will fit on other X100 series camera's like the X100VI as well but I haven't tried.

Comment & Rating (55)

@user_2696465453

Boosted

works on x100VI but it’s stuck now 😣😣😣

The designer has replied

@bjornheirman

You must have used a lot of force to get it in then. Did you sand it down for a good fit as per the description?

@user_2696465453

Boosted

manage to pull it out with pliers, sanded it done some more 👍

@printsexchange

Print Profile

0.12mm layer, 3 walls, 100% infill

much like everyone else said, it took about 1 minutes of sanding. very comfy grip. thank you for your contribution

The profile uploader has replied

@bjornheirman

thanks for your comment!

@KTFB

Working great with my X-Pro 2! The ergonomic design is super nice. Thanks!

@AlbertMorenoDEV

Print Profile

0.12mm layer, 3 walls, 100% infill

Nice design. The tricky part is to remove the supports and sand that part.

@oscarvdwant

Print Profile

0.12mm layer, 3 walls, 100% infill

Printed well, but doesn’t fit my x100vi :(

The profile uploader has replied

@bjornheirman

When printed it's a bit thicker. You need to sand down the part that slides in the hotshoe to make a perfect fit. That's the only way to get a good friction fit. Another user reported it worked in his x100vi.

(Edited)