Bearings from Card Shuffler Gift Fillament Roller
Print Profile(1)
Bill of Materials
Description
This Model is similar to most fillament rollers, but instead it uses the Ball Bearings you have if you got the Card Shuffler Gift in the Black Friday promotion. Those are the Model MR128zz with measurements of 12mm(outside), 8mm(inside), 3,5mm(height). You'll need 4 per Model so you can make Rollers for 3 Fillament rolls. No glue is needed everything can be presure fitted. The 2 Frame Parts fit together quite tightly so you may need to carefully Hammer them together.
The Supports set in the Preset may be a bit of a pain to get out, i recomend carefully(!) pressing it with a knife in 2 Spots and then use small Pliers to pull it out, in some cases, especially if the printbed is still warm it may detach on its own.
Boost Me (for free)
If you find this model to be useful, a Boost would be greatly appreciated. :)
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (21)