Samsung Galaxy s24+ / s24 plus phone case (Dragon) - Free 3D Print Model

Search models, users, collections, and posts

chete.alvarez

Hobby & DIY>Electronics

IP Report

Print Profile(3)

All

P1S

P2S

P1P

H2S

X1 Carbon

H2C

H2D

X1E

H2D Pro

A1 mini

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

1.3 h

2 plates

4.6(18)

0.2mm layer, 3 walls, 15% infill ,no int. supports

Designer

1.3 h

2 plates

5.0(2)

0.2mm layer, 3 walls, 15% infill

1.8 h

2 plates

5.0(2)

Open in Bambu Studio

Boost

123

303

176

Released

Description

Content has been automatically translated.

Show original

Phone case for Samsung Galaxy S24+ with buttons.
DO NOT GLUE the button plate, just put it in place before inserting the smartphone.
I recommend printing with the profile supports so that the final overhang prints well, even if it is annoying to remove the supports.

It can be printed with or without AMS, configuring the printer in the slicer as multi-material. If you don't know how to do it, I leave you a link to the many tutorials on this topic.
https://www.youtube.com/watch?v=yB_wugh4ojY
(14:39 min)

Samsung

smartphone accessories

Comment & Rating (36)

@Honigdags

Print Profile

0.2mm layer, 3 walls, 15% infill ,no int. supports

tpo

The profile uploader has replied

@chete.alvarez

Thanks for confirming that it can also be printed on TPU

@ST3D

Print Profile

0.2mm layer, 3 walls, 15% infill

@user_88497616

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill ,no int. supports

Support and strength issues when printed in PETG. The lip that holds the phone tends to separate easily and couldn't endure being dropped. Reprinted in red clear PCTG (dragon was white PETG). Seems to be stronger.

(Edited)

The profile uploader has replied

@chete.alvarez

Thank you so much for sharing your experience with other materials. I've only tried PLA. I gather that for printing with PETG, it's better to use the profile with internal supports.

@user_88497616

Boosted

PETG printed fine - yes, i used supports. I found PLA too brittle. My phone hits the ground WAY too often and PLA shattered. PETG works better, but eventually the lip would separate. I have found PCTG superior to PETG. It print as easily as PETG, but is hard to find and more expensive. If more people use it, more companies will make it.

(Edited)

@chete.alvarez

Replying to @user_88497616 :

That's right, I like the case to break when the phone falls because it does its job and absorbs the impact. That's why I generally don't make them from TPU. In your case, if the phone falls frequently, it's a very good idea to use PETG, which is more flexible, and PCTG is much better, even though it's very expensive.

(Edited)

Show original

@AJTHEDEMON01

Could you maybe make an A15 version of this case?

The designer has replied

@chete.alvarez

I'm sorry, but to properly create a new case, I need the smartphone to print and test it. Otherwise, it would just be a virtual design, untested.

@user_420062931

is it possible to make this for an A15

The designer has replied

@chete.alvarez

of course! With any model

@Vicente_Luna

Print Profile

0.2mm layer, 3 walls, 15% infill

It works well, it would be good to upload one to place the design you prefer

The profile uploader has replied

Show original

@chete.alvarez

Thank you very much. As for modifying the design, it's complicated because it's embedded in the model. I mean, if you remove the dragon, you'll see that the hollow remains in bas-relief. It's made this way because by placing the dragon at the same height as the casing without eliminating the intersection, it doesn't look as well defined in the slicer. I even tried to make it protrude 0.01mm to force the overlap, but it doesn't look as good

Show original

@user_2608690814

Print Profile

0.2mm layer, 3 walls, 15% infill

Stellar case. Easy print.

@chete.alvarez

Muchas gracias

@user_4124753924

how can we put different design

The designer has replied

@chete.alvarez

Hi! I'm sorry, but you can't easily change the design. The image is embedded in the model. It's part of the 3D modeling process.

(Edited)

@SIRUS

Print Profile

0.2mm layer, 3 walls, 15% infill

good phone case

@santologe

Print Profile

0.2mm layer, 3 walls, 15% infill

did not finish printing

Missing Model Parts: Layers are missing

The profile uploader has replied

Show original

@chete.alvarez

Can you tell me what problem you are having? I have checked it and it works perfectly. Are you using Bambu Studio or Orca Slicer? Note that there are two printing plates

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Minimalistic Phone Stand

HpInvent

45.8 k

7.5 k

Phone Stand (No AMS needed)

Reckit

58.4 k

12.3 k

TILT PHONE STAND

Matthew Ghost

54.5 k

11.6 k

Samsung Galaxy S24+ (plus) Voronoi case v2

ThesBer

605