Rock Band Madcatz Portable Drumkit Frame
Print Profile(1)
Description
This is a printed ‘adapter’ to mount the Madcatz Portable Drum Kit for Rockband onto, making it an “un-portable” kit!
| Part | Qty | Material |
|---|---|---|
| Rings | 4 | PETG |
| Pole Tops (Mirrored) | 2 | PETG |
| Central Bridge | 1 | PETG |
| Side Bridges | 2 | PLA |
| Stick Holder | 2 | PLA |
| Controller | 1 | PLA |
| Strut Left | 1 | PETG |
| Strut Right | 1 | PETG |
| Replacement Feet (Optional) | 4 | PETG |
| Central Strut (Mirrored) | 2 | PETG |
REQUIREMENTS
E-Kit 1.5" frame legs (used in ION, Alesis and Roland kits)
M3 Heat-Set Inserts, Minimum 14, Full 32
M3 Bolts, Minimum 14, Full 32
M5 Bolts and Nuts, Minimum 2, Full 7
Madcatz Rock Band Portable Drum Kit (360/PS3)
Takes approx. 2kg of filament; Highly reccomend PETG for the 4 rings, pole toppers, lower struts and centre bridge. PLA is fine for the other non-strain bearing parts.
Mine is printed on the Bambu Lab P1S with a 0.8 nozzle, Bambu PETG-HF and Bambu Matte PLA
Future TODO:
Printable solution for the frame legs, besides just an enormous 1.5" cylinder
Pedal anchor similar to official RB kits
Cymbal mounts for more hacky things (replace the controller with homebrew?)
License
Comment & Rating (0)