Cherry pitter
Copyright Claim
Cherry pitter
Boost
21
29
18
Print Profile(2)
0.2mm layer, 4 walls, 25% infill
Designer
2.2 h
1 plate
0.24mm layer, 3 walls, 15% infill, PLA
1.3 h
1 plate
Open in Bambu Studio
Boost
21
29
18
9
96
69
Released
Description
Cherry and other smal fruit pitter
bottom part from PET-G with support
upper part from ABS without support
infill 25%, 4-5 walls
0,15-0,2mm height of layyer
you need bolt M5x20 and nut M5 for assembly
Comment & Rating (18)
All
Boosted
Used Eryone PLA+, great model! Printed well on the A1 mini with the 0.24 Draft present. Thank you for the upload!
The designer has replied
1
Reply
I’m not sure, if it is good idea to make ot from PLA. I recomand it from PET-G because of strenght of spring on bottom part. But you will see how is it going 👍
1
Reply
Boosted
Replying to @ATTV85
Cheers, I heated the "spring" part and lowered a bit in order to minimize strain on it, so far it went through 2kg of cherries and it's still in tip top shape. It sure beats driving to to the shops and buying one :)
1
Reply
Replying to @faneboss
Yesterday we made 6 kilograms of cherryes on it and today another 5 kilos. and it works well. Sure, you can buy similar tool in shop I want to make something when it wasn’t. We have two of theese at home for 2 years and made almost 30 kilos of cherryes on it and everything is ok 🙂
1
Reply
Print Profile
0.2mm layer, 4 walls, 25% infill
super funktioniert alles.
1
Reply
Boosted
Print Profile
0.2mm layer, 4 walls, 25% infill
Funktioniert wunderbar
1
Reply
Boosted
Print Profile
0.2mm layer, 4 walls, 25% infill
works. pla not so much as strength isbpoor
The designer has replied
0
Reply
How I writing in model information:
- bottom part from PET-G with support
- upper part from ABS without support
Pla is nor good for this model
0
Reply
Boosted
Replying to @ATTV85
YEP, Just making comment for others. I did print petg and works well
(Edited)1
Reply
Print Profile
0.24mm layer, 3 walls, 15% infill, PLA
Funktioniert super
0
Reply
Boosted
Works well!
0
Reply
Print Profile
0.24mm layer, 3 walls, 15% infill, PLA
Support Issue:Supports are hard to remove.
Other Issues:the hole is too small for the shaft to be inserted. had to replace that with a screw.
0
Reply
Print Profile
0.2mm layer, 4 walls, 25% infill
0
Reply
Print Profile
0.24mm layer, 3 walls, 15% infill, PLA
0
Reply
Boosted
Print Profile
0.2mm layer, 4 walls, 25% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRemixes (1)
Related Models
© 2024 MakerWorld