Nintendo 3DS Display Stand - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Retroperspektive42

Tools>Gadgets

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 10% infill

Designer

1.2 h

1 plate

4.3(12)

Open in Bambu Studio

Boost

207

299

190

Released

Description

This is a remix of the GameBoy Advance SP display stand from DjJoris. I added the 3DS logo and adjust both wings of the stand for the 3DS proportions.

Please enjoy!

Comment & Rating (18)

@user_746407666

if viewed from the front, it is noticeable that the letters are floating

Show original

@thdittl

Print Profile

0.2mm layer, 2 walls, 10% infill

Nice and smooth. Used a quick grip clamp and a piece of wood to slowly set the uprights into the base.

@Matchagirl97

Print Profile

0.2mm layer, 2 walls, 10% infill

4 stars because I had to slightly sand them to make them fit and had to touch up the lettering a bit in white with acrylics but otherwise perfect

Show original

@Stonehenge_90

Print Profile

0.2mm layer, 2 walls, 10% infill

Logo needs more layers

@Matchagirl97

true, I had to use acrylics and fill in the white

Show original

@CPM_Dalek

Print Profile

0.2mm layer, 2 walls, 10% infill

I had to trim down the pegs to get the pieces to fit in the slots, but it works.

The profile uploader has replied

@s.dersch1986

thank you for your Review!

@Suunnee

Thank you for the design. Although the bracket anchors need to be adjusted because they don't fit well. On the other hand, the white letters have too much infill, another layer would be good

Show original

@user_559945456

Works great, but some things I think could help it: Letters are floating which caused my print to fail so using it without the "3ds" filled in and the stand arms a bit tight. I had to hammer it lightly in to get the arms into place but other than that works great!