Balrog Book Nook and Wall Mount - Free 3D Print Model

Search models, users, collections, and posts

Treddigineer

Household>Decor

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 2 walls, 20% infill

Designer

45.9 h

3 plates

4.8(86)

80% scaled + parts, 0.28mm layer, 2 walls, 5% infill

8.7 h

2 plates

5.0(69)

Optimized Settings

13.3 h

1 plate

Open in Bambu Studio

Boost

2534

6533

240

315

3 k

974

Released

Description

Hi all

This is a book nook horror inspired by Balrog from The lord of the ring

You can find 3 plate so you can chose what version print

The first one consists of 2 pieces (box with face and whip)

The second one consist of 3 pieces all splitted (box, face and whip, i dont like print the face flatten but i leave the choose to you)

The Third is a Wall mount Version

and yes mate, this one have a lot of support, so arm yourself with patience ;D

the dimension is approximately 11x10x21cm you can scale it as you wish

At the back there is a niche where you can place a weight to prevent the piece from falling forward

enjoy

If you wand more exclusive book nook or need a commercial license you can find me on Patreon, link in my bio <3

Boost Me (for free)

If you love what i make, give me a pieces of your hearth <3 is free!

Boost Me (for free)

If you love what i make, give me a pieces of your hearth <3 is free!

lord of the rings art

lord of the rings book mark

lord of the rings bookmark

Comment & Rating (240)

@DLCharette

Print Profile

0.2mm layer, 2 walls, 20% infill

The details are insane! Keep up the great work!

@user_1304995963

paint job looks amazing!! care to share the order of steps you took for it?

(Edited)

@DLCharette

Replying to @user_1304995963 :

Thanks! I started with a yellow/neon yellow wash, dry brushed lightly with red/red neon then dry brush black lightly on top. The whip was printed in orange pla with red dry brush highlights.

(Edited)

@reydeldesigns

Beautiful Brother!!

(Edited)

@cj_markham

painted it in Bambu studio without the tail and only using black, white, red, orange and yellow in the AMS. Took 3 days to print but love the result.

@Thrillhouse

How many color changes was this?

@cj_markham

Replying to @Thrillhouse :

5. white/yellow/orange/red/black, but you could reduce it to 4 by swapping yellow for the white

@dagit.dg

can you upload your painted profile?

@wesk86

Print Profile

0.2mm layer, 2 walls, 20% infill

Printed it without the whip, I'll be painting it as well, awesome print! update: it's been painted!

@Tagout1221

did you scale this up?

@wesk86

Replying to @Tagout1221 :

Nope, and as you can see it came out at a great size.

@Tagout1221

Replying to @wesk86 :

Thank you for letting me know! :D

@_donkey_brains_

Very cool model

@smokeless93

Did you print it with black only ?

@_donkey_brains_

No. I edited the model myself and cut it up to print the background flames and the teeth separately. the face is printed in red/black two tone filament.

@Aldania

Boosted

Printed great and was so fun to put together! 10/10

@Aldania

Boosted

Could have painted the whip part better but I got too excited to put it together lol

@howdoiopenpdf

this looks really good. what kind of paint/painting technique did you use?

@Aldania

Boosted

Replying to @howdoiopenpdf :

I kinda winged it with my airbrush from harbor freight and some acrylics lol

@wwcenturion

Boosted

Turned out great. Used Gilded Rose Silk PLA from Bambu. Printed with default settings on a X1C. About 12 hrs total. Thanks OP!

@user_3022051748

Print Profile

0.2mm layer, 2 walls, 20% infill

Design is awesome but, BIG but, the print profiles are the worst. I wasted half of spool on failed print because supports where too weak or printing was too fast or just the orientation was bad. I don't recommend printing it all together and I had to print the face flat coz the horn is a pain to print.

Support Issue:need strong not hybrid supports and printing speed need to be lower

Strength Issue:printing in default settings can't hold the horn in place even with different supports or filling

@user_2727836364

if you can, adjust it in bambu studio

@Lalogirl

Boosted

Print Profile

0.2mm layer, 2 walls, 20% infill

love it! I did hav a hard time printing (maybe because my printer is a bed slinger or other external factors) but it was worth trying a couple times, because it’s awesome! it looks great next to my Sauron nook! I wound up setting the supports to strong rather than hybrid and had a successful print. I haven’t seen anyone else having issues, so I don’t think it’s of any fault of the model. I cant wait to paint it to show off the details of this print! thank you for making such awesome models!!!

@user_4249640450

Sounds similar to the issue I'm currently facing, might give strong supports a go!

@Lalogirl

Boosted

Replying to @user_4249640450 :

it fixed the issue for me on this one. unfortunately, I’m having the same problem with the alien nook and it’s still failing despite switching to strong supports. idk if I just got lucky, but hopefully it works for you too!! :)

@irononreverse

Print Profile

0.2mm layer, 2 walls, 20% infill

used tree supports and 0.12 layer height. Very clean print and excellent model

@user_1267085990

may i ask what is the color filament you used to print this

@skyewizard

Boosted

this is a gorgeous print! I printed with Eryone tri-color filament in black-gold-red and it is spectacular!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Wall Hook with one Mount

PrintManufaktur

22.3 k

8.2 k

IKEA Skadis Wall Mount

AU3D

31.8 k

9.8 k

Guitar Wall Mount

VICLER

22.2 k

5.8 k

Drogon Book Nook and Wall Mount

Treddigineer

4.7 k

3.6 k