cover

Capture.PNG

plate_1.png

2024-11-10_d667882c04d15.webp

Colors and PLA support interface.&nbsp;*fixed upside down heart.

0.2mm layer, 2 walls, 15% infill

waylaidwanderer

ezgif.com-optimize(1).gif

PXL_20251214_021718829.PORTRAIT~4.jpg

This print profile fixes several issues with this Companion Cube model.&nbsp;Model repair and repainting:<ul><li>The original model is hollow and missing supports for the inside which causes the print to fail.</li><li>The model was repaired using the slicer&#39;s &#34;Fix model&#34; tool to make it solid.</li><li>After repairing, the entire model was repainted.</li></ul>Print settings included in this profile:<ul><li>0.4mm nozzle, 0.2mm layers, 2 walls.</li><li>15% Adaptive Cubic infill.</li><li>5 bottom layers to reduce infill showing through the white panels (especially around the heart).</li><li>Support settings are tweaked slightly.</li></ul>This profile is saved at the model&#39;s default size. You can scale the model as desired (for example, to 10 cm like I did). I printed this on my H2C which minimizes purge waste, but you may wish to tweak your purging volumes. I suggest a 0.8 multiplier which should be safe and save you 20% purge waste.

Solid Fix + Repaint, Thicker Bottom Layers, Support Tweaks

Several different companion cubes exist, but none are ready for multicolor printing with an AMS.&nbsp;<boostme><boosttitle>Boost Me</boosttitle></boostme>

Print Profile(2)

Description

Comment & Rating (31)

License

Related Models

Portal Companion Cube AMS Multicolor

Print Profile(2)

Description

Comment & Rating (31)

License

Related Models