40mm Vacuum Hose Holder - MFT - 20mm Dog Holes.

Thanks for the boost, I'm glad to see it works with hoses that are bigger than 40mm.

Thanks for the photos they look so nice.

Sure, will you also measure 1. the OD of your hose, and 2. the distance between the bumps on the hose, and 3. the depth of the bumps. When I upload the print, will you please share a new post with a rating, many (3) photos. (they don't need to be good, just more photos with a rating to bump the comments to the top of the comments. (FYI the existing top moment is someone who used a bigger hose for the smaller print.) I'm working with you to fix that. ;-)

Thanks for the Boost, It was born from necessity, when my vacuum hose kept falling off the table.

I will make it, everyone who's asked for it has failed to give me the hose dimensions. To make one, I need: 1.most important, you need to send me some photos (ideally min 2) after you've printed it. 2. you need to ping me in the DM as I can't send you the file or upload it until it's good to publish. 3. hose OD. 4. Depth of the ribs. 5. pitch between the ribs - if they expand, just the expansion that looks default or ideal when clipped in. 6. Are the treads on the hose, left hand or right hand. (FYI bottle caps and screws use right-hand threads.)