MadPawz Pawgrip | MiyooMini+ Handheld

Visit the MiyooMini+ community at https://www.reddit.com/r/MiyooMini

This is a GBC-style grip mod for the Miyoo Mini Plus handheld, making the Mini+ far more comfortable to hold and play on, especially with adult-sized hands. The PawGrip has been specifically engineered to make the Miyoo comfy, while keeping it portable.

Installation:
M2, 6mm, self tapping wood screws are recommended to secure the trigger buttons to the grip. Note: Fine-pitch machine screws might not bite into the plastic enough for a secure fit. Wood screws or course-pitch screws work best. The MM+ stock screws are close to an M1.7, 6mm machine screw. After 10+ grip swaps, they may begin to strip out the front plastic frame. If this does happen, I'd recommend either moving up to slightly larger screw with a small head, like an M1.8 or M2, or upgrading the MM+ front plastic frame with M1.4-1.6 inserts and machine screws. Adding inserts will allow unlimited swaps without issue. Another solution to this is to use Onion OS or one of the other many projects that allow WiFi based file transferring to/from the MM+. Then there's no need to remove the Pawgrip to access the SD-card.

https://a.aliexpress.com/_mqQx7gU