Flux Capacitor Light up Box - Free 3D Print Model

Search models, users, collections, and posts

Shane Lee Designs

Props & Cosplays>Other Props & Cosplays

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 3 walls, 8% infill

Designer

24.6 h

9 plates

5.0(24)

Open in Bambu Studio

Boost

692

1779

744

180

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

6500K White LED Light Strip

Bambu Filaments

Select all

List other parts

Yellow 4mm OD PTFE/Silicone Tube x 3:
2.1mm x 5.5mm DC Power Connector x 1:
0.4mm Clear Plastic Sheet (for glass effect) x 1:
Pneumatic Straight Fitting for 4mm OD Tubing (1/8" thread) x 6:
Rocker Power Switch x 1:

Description

Boost Me (for free)

💡 Support My Work! If you like what you see, consider boosting my models to help me keep creating awesome content. Every boost helps me make better, more innovative models for everyone to enjoy! 🙌✨

Edit 05/04/25 - added some images below to help with where and how to mount the LEDs and wiring, hope this helps.

Edit 22/01/25 - i have added a template for the glass cutting - cut to the outer edge of the template.

Bring Time Travel to Your Desk – 3D Printable Flux Capacitor (Back to the Future-Inspired)

⚡ Great Scott! Take your 3D printing projects to the next level with this meticulously designed, display-ready flux capacitor model, inspired by the iconic prop from Back to the Future. Perfect for 3D printing enthusiasts, sci-fi prop collectors, and fans of the legendary time-travel trilogy, this model combines nostalgic charm with innovative design.

Key Features:

Support-Free Printing: Skip the hassle of supports! Designed for efficient and clean printing, every piece of this flux capacitor fits together seamlessly. your print will snap together easily when using a well-calibrated printer. Optional use of a spot of glue is recommended for added stability over time.
Immersive LED Lighting: Create a dazzling display effect using 12V COB LEDs beneath printed transparent PETG "bulbs." Enjoy a realistic glow that brings the flux capacitor to life, transforming your display into a true conversation starter.
Customizable Outer Box: Choose from two outer box designs based on your needs! One variant is optimized for the stated hardware with thoughtfully placed holes to support wire routing, while the other box comes with a clean surface, ready for you to modify to your unique requirements. use negative modifiers in Bambu Studio to create custom size holes for your own hardware.
Wire-Friendly Design: With cleverly hidden channels and stand-offs, wiring and cable management is a breeze. This ensures your lighting setup remains neat and professional-looking.
Display Quality: While not made to scale, this model perfectly captures the essence and “wow factor” of the original prop, making it an impressive addition to any fan's display shelf.

Hardware Requirements (Not Included):

Yellow 4mm OD PTFE/Silicone Tube
Embossing Label Machine
Pneumatic Straight Fitting for 4mm OD Tubing (1/8" thread)
0.4mm Clear Plastic Sheet (for glass effect)
2.1mm x 5.5mm DC Power Connector
Rocker Power Switch

Printable versions of the PTFE Tube courtesy of User:Frosty Kentucky
https://makerworld.com/en/models/1389328-pipe-4mm-flux-capacitor-light-up-box#profileId-1439350

Easy Assembly

Assembly is straightforward, but if you get stuck, please reach out.

The Led Strip sticks to the “Brass” Section, and the wires run down the channel.into the lower box, the transparent crystal then slots on above the LED, hope this helps.

Boost Me (for free)

Comment & Rating (90)

@user_2651759560

Boosted

Thank you for creating it!!!! Since the PTFE tubing was too expensive for me, I designed the tubes myself. https://makerworld.com/en/models/1389328

(Edited)

The designer has replied

@ShaneLeeDesigns

a perfect addition for people that don't want to buy, I will like to your model from my page

@Bierfreund187

where do you get the adapters for the hoses thank you for the info

Show original

@user_1054821136

Wasn't a fan of the flat sparkplug caps so I grabbed them from another model. I also used mini addressable leds so I could have two rows and more effects. I did have to scale down to 93.33% to fit my ender but it looks good in my BTTF shrine. I am using WLED to control the lights.

The designer has replied

@ShaneLeeDesigns

awesome job, thanks for sharing

@tontonseb01

Hello can you give me the links for the LEDs and for the candle caps and if possible a photo to see the electrical connection thanks a lot

Show original

@DarthOctane

looks like you used the radbench caps and grommets for the "wires" did you just scale them down? Looks very clean. Nice job

@user_453419477

Boosted

Fantastic print. My best print ever. Everything went great. So much attention to detail. Thank you so much for such an amazing print. I also added this led flash strobe controller to control the lights. Great results https://a.co/d/91En5Dn

(Edited)

The designer has replied

@ShaneLeeDesigns

absolutely fantastic, and supper happy to see a complete print, I really put effort into making this a clean and easy kit, thankyou for sharing and for boosting it means alot !

@user_453419477

Boosted

Replying to @ShaneLeeDesigns :

I also used an led light flash strobe controller, thanks again 👌

@GigaMark

Boosted

Print Profile

0.16mm layer, 3 walls, 8% infill

Only change I made was 100% infill on spark plug boots, print went flawlessly.

The profile uploader has replied

@ShaneLeeDesigns

awesome job, thanks for sharing :)

@matunwin

It's worth trying out these settings for the 'Bulbs' - sure it takes longer (a LOT longer), but the result is VERY clear pieces - without any support lines. These are mine - pre-sanding and polishing. They look like frosted glass... https://www.reddit.com/r/BambuLab/comments/10z7p4s/printing_glass_transparent_petg_my_findings/#lightbox

The designer has replied

@ShaneLeeDesigns

thanks for the update, I hadn't got round to looking into this, some useful information in there !

@user_2698822588

Boosted

A truly beautiful print I also printed the pneumatic components and the white tubes from the printer fit perfectly Now just the lighting and labeling remain

(Edited)

The designer has replied

Show original

@ShaneLeeDesigns

absolutely fantastic work, and great work making the connections, it's great to see people enjoying my models 😄

@extruder.co.nz

Printed at about 33% scale, so it could fit on my desk. awesome model!

@Brian_L

Came out amazing!

@user_1059816780

Print Profile

0.16mm layer, 3 walls, 8% infill

It's really cool

Show original

@TechJag

Boosted

Print Profile

0.16mm layer, 3 walls, 8% infill

The profile uploader has replied

@ShaneLeeDesigns

thankyou for sharing and eating :)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.