Search models, users, collections, and posts

Articulated Nutcracker

Zurlingo-3D
Toys & Games>Other Toys & Games
IP Report

Print Profile(2)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
H2D
H2D Pro
H2S
P2S
H2C
X2D
A2L
0.2mm layer, 3 walls, 8% infill
0.2mm layer, 3 walls, 8% infill
Designer
14.7 h
1 plate
4.8(23)
Stand, 0.2mm layer, 3 walls, 8% infill
Stand, 0.2mm layer, 3 walls, 8% infill
Designer
1.1 h
1 plate
4.7(11)
Open in Bambu Studio
Boost
281
458
45
25
597
244
Released 

Description

An Articulated Nutcracker - With Display Stand

 

A great decoration for any house over the festive period!

 

Designed to print in place with no post processing required!

 

Stand Assembly:

 

Push the stand arm into the base and then push the nutcracker into position using the square hole on the back. No glue is required, and the nutcracker can be put on and off the stand in a matter of seconds.

 

 

Print Settings:

  • 0.2mm Layer Height
  • 0.4mm Nozzle
  • 3 Perimeters
  • 3 Top/Bottom Layers
  • 12% Gyroid Infill
  • No Support
  • Use a Skirt or None For Bed Adhesion

 

 

Thanks for looking! - Don't forget to post pictures of your makes! :)

Christmas
nutcracker
articulated
painted
print in place
no supports

Comment & Rating (45)

(0/1000)
@KiCkiN
Print Profile
Stand, 0.2mm layer, 3 walls, 8% infill
Great base for the model
0
Reply
@KiCkiN
Print Profile
0.2mm layer, 3 walls, 8% infill
Perfection
0
Reply
@iamnotwhoiam
Print Profile
0.2mm layer, 3 walls, 8% infill
first true multicolor print and it came out pretty decent. only issue is the arms seem to tilt backward when on the stand.
0
Reply
@iamnotwhoiam
Print Profile
Stand, 0.2mm layer, 3 walls, 8% infill
printed in some bambu silk silver and came out very nice. only suggestion would be to have the attachment point angled slightly upward so as to help the model from wanting to potentially slide off since it’s not as snug as I suspected it would be.
0
Reply
@user_3347049795
The print profile is no longer public
Magnificent model, congratulations to the creator, everything is perfect 👌🏼 Thank you
Show original
0
Reply
@lordkeeper
Boosted
Print Profile
Stand, 0.2mm layer, 3 walls, 8% infill
0
Reply
@lordkeeper
Boosted
Print Profile
0.2mm layer, 3 walls, 8% infill
0
Reply
@MJSARTISTRY
how do I print this without AMS. I want to print it in all white to be painted
The designer has replied
0
Reply
@Zurlingo3D
Just open the profile in bambu studio and remove all colours accept 1 in the filament section.
0
Reply
@selmans
where s stand ı cant find stand model
0
Reply
@ziggyfreud538
Boosted
Print Profile
0.2mm layer, 3 walls, 8% infill
Turned out great
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Articulated Shark
Articulated Shark
mcgybeer
98.6 k
18.2 k
Articulated Hand
Articulated Hand
MingGY
40.5 k
15.1 k
Articulated Cute Octopus
Articulated Cute Octopus
3DPrintyi
46.7 k
15.6 k
Articulated Crystal Dragon
Articulated Crystal Dragon
Maty505
60.5 k
7.5 k