45 Degree Angle Piece Gutter Downpipe East West
Print Profile(1)
Description
This is a 45-degree angle piece that connects a West/BRD gutter to an East/DDR downspout. I call it the "East-West Connector" for that reason. The West/BRD part is widened and has an inner diameter of 107 mm. The East/DDR part is narrowed and has an outer diameter of 104.5 mm. PETG is recommended for outdoor use. The print was done with PETG at a maximum speed of 100 mm/s. This worked perfectly. For PLA, which is not recommended due to its poor weather resistance, standard settings can be used. I recommend using a tree as a support.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)