Battery Safety Controller Box for Energy Storage - Free 3D Print Model

Search models, users, collections, and posts

TTaurus

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

5.3 h

2 plates

Open in Bambu Studio

Boost

Released

Description

There is a great open source project by shining-man on github: https://github.com/shining-man/bsc_fw

Please support the developer of this project:

Paypal: https://www.paypal.me/shiningman11

This is a 200x140x43mm case.

I added an independent step down controller for a redundant DC supply.
https://www.roboter-bausatz.de/p/dc-dc-5a-servo-driver-board-7-30v-auf-5v-konstant

I've added a white LED for power ok and a red one for no communication with the BMS.
I've glued the LED in place with hot glue.
For the 5mm LED I've printed the lid with a 15% mesh infill and drilled a hole just through the inner layers.

You will need 4x M3 threaded inserts.

Comment & Rating (1)

@tHerEaLsTefaAn

I printed it in PETG and it fits well. I installed a different DCDC and fixed it with a drop of hot glue. Not as elegant as the existing slot but it fits. Thanks!

Show original

No more